HEMP NANOTECH – BIOBONG BUSTER DETERGENT | 300gr

3,84 

Out of stock

Shipping

Shipping information

Click here

2-year warranty

2-year warranty on mechanical parts

BioBong Buster is the powder cleanser for cleaning encrusted or dried out Bongs and Hookahs that does not require stirring or mechanical action. The cleaner is composed of nascent oxygen-modified Mineral Salt. A biological product made by modifying natural sodium salts treated with ultrasound and hydrogen peroxide, the salt is ‘filled’ with oxygen. The newly formed salt is very stable at room temperature, but ready to release oxygen above 60C°. When the salt reaches 60 degrees (e.g. in very hot water), the oxygen it contains comes out vigorously, creating an oxidation-reduction reaction against carbon deposits, solidified resin residues and oil.

This is a radical solution that enables deep and homogenous cleaning of all surfaces, even the most difficult to clean, excellent cleaning results even in crevices and tiny cavities. The neutral Ph is the best guarantee that the product is non-corrosive and will therefore leave surfaces shining and sparkling clean.

Bio bong buster instructions for use:

  • 1. Heat a pot with water, any type of pot will not be damaged, in fact the BioBong Buster will have a sterilising role;
  • 2. When the water starts to smoke about 70-80 c° put about 30g of BioBong Buster in the bong or any other instrument to be washed and immerse it in the water;
  • 3. Wait about 5 – 10 minutes;
  • 4. Rinse with lukewarm or hot water

This method avoids soiling where the instruments are cleaned, the cooker, sink and pot will be easily cleaned with one rinse and the dirt will go down the drain.

Brand

HEMP NANOTECH BY NANOTECH SURFACE

NanoTech Surface studia, sperimenta, produce e commercializza processi, prodotti o additivi nanotecnologici capaci di far interagire le superfici dei manufatti in maniera attiva nella decontaminazione ambientale e nel risparmio energetico. Svariate collaborazioni con Politecnico di Milano e Torino, Università di Torino, Università di Ferrara hanno permesso all’azienda di valutare l’efficacia di prodotti giapponesi e consentito di elaborarne nuove formulazioni made in Italy. Si tratta di prodotti esclusivi e certificati nell’abbattimento di inquinanti atmosferici e con proprietà autopulenti delle superfici, trattamenti antibatterici con presidio medico chirurgico a lunga durata, prodotti per la coibentazione termica.  L’azienda è in grado di fornire additivi in stato di polvere da aggiungere in massivo per plastiche o agglomerati, oppure prodotti finiti per il trattamento superficiale che in alcuni casi potrà essere eseguito direttamente in opera ed in altri a livello di produzione industriale. Sistemi che sfruttano gli ultrasuoni di potenza,o la cavitazione idrodinamica per cambiare le propietà dei liquidi e dei dispersi in essi contenuti. Lavaggi industriali in acqua fredda molto efficaci, sistemi di rigenerazione delle eumulsioni, sistemi di decontaminazione dell'acqua e dei percolati.